The SALTO - Wireless-Gateway 3 BLUEnet -
GATEWAYx3CEU is the link the PC and the wireless network. Completely
managed through SALTO ProAccess SPACE software, it collects all the information
sent by the escutcheons or the electronic cylinders through the nodes by using
the Bluetooth smart technology.
Up to 7 nodes can be connected to a Wireless-Gateway
3 BLUEnet (1 internal + 6 external nodes). 1 internal SALTO BLUEnet node
included. Mixed operation of RFnet and BLUEnet nodes is possible. All
communication with the SALTO Gateway 3 is AES 128-bit encrypted. Max. 16
BLUEnet access components per repeater / node, of which a maximum of 2 SVN-Flex
update points. Max. 112 BLUEnet access components per gateway.
Main features
- Compatible
with SALTO BLUEnet wireless network
- Wireless
radio frequency based on Bluetooth Low Energy
- AES 128bits
encryption
- connection
to the LAN Network 10 BASE-T/100 BASE-TX
- PoE
supported IEEE802.3af (12V power adapter optional)
- Can manage
several nodes and many locks
- One gateway
can manage up to 7 nodes (1 internal + 6 external nodes)
- External
nodes compatible through BUS485: RFNODE (RFnet) and RFNODE3 (SALTO BLUEnet)
- IP
addressing through web explorer available
- Firmware
update via software through Ethernet connection
- One
internal node included (SALTO BLUEnet node)
- LED lamps:
Multi colour led to notify the status of the device
- Tamper
switch: Built in tamper microswitch to notify if the Gateway has been opened
- DHCP by
default: Recommended
Technical Details
- Temperature:
Min 0 - Max 60
- Humidity:
Min 35% - Max 85%
- Cable
requirements:
- Ethernet:
UTP CAT5e
- Node
Connection (AB): Generic twisted pair wire
- Node
Connection (Vdd): 24 AWG
- SALTO
BLUEnet Characteristics (if internal node installed):
- Frequency
Range: 2400-2483 Mhz
- RF
Standard: Bluetooth Low Energy
- Indoor
Radio Range: 10/15m
- Max output
power: 8dBm
- PoE (IEEE
802.3af):
- Class: 2
- MaxPower:
5W
- Ethernet
standard: 10BASE-T/100BASE- TX.
- Auxiliary
Power Supply:
- Input
voltage: 10V (Min.) - 15V (max)
- Current
consumption: 75mA (Min.) - 500mA max)
- Includes
tamper to monitor if the wall reader has been opened.
